Artificial Grass Installation part 3

Connecting The Seam

Join two grass pieces as close together as possible. There cannot be any overlap.

Ensure that the pile direction on both rolls of turf is facing the same way.

Seam tape is needed to connect two grass pieces together. Before adhering both pieces, make sure that both edges are properly trimmed, straight and match up perfectly.

Infilling

To finish, apply silica sand to the turf with a drop spreader.

Make sure the turf fibers are 1cm above the infill (flat and compacted).

Keep the area dry and unpolluted when infilling the yawn.

For the best results, brush the pile before, during and after.